Adjustable Gutter Roll Forming Machine by Gear Box
Adjustable Gutter Roll Forming Machine by Gear Box
| Payment Type: | L/C, T/T, Money Gram, Western Union |
|---|---|
| Min. Order: | 1 |
| Productivity: | 300sets/Year |
|---|---|
| Place of Origin: | Jiangsu, China |
| Supply Ability: | 300sets/Year |
| Certificate: | SGS, ISO9001, CE |
Basic Info
Model No.: Rolling Machine
Product Description
Model NO.: Rolling Machine Forging Forming Method: Mold Forging Feature: High Efficiency Warranty: 12 Months Advantage: Use Widely Color: Blue Trademark: SAIBO Origin: Jiangsu, China Type: Rolling Machine Power Source: Hydraulic Pressure Certification: SGS, ISO9001, CE Customized: Customized Condition: New Drive Way: by Gear Box Specification: CE, SGS HS Code: 84552210 The production flow of equipment:
Hydraulic decoiler→ feeding→flatten→cutting→roll forming→output table
Feeding-flatten-pre-cutting-forming station
Feeding
Adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Feeding type: Adjustable
Feeding width range: 700-900mm: 700-900mm
Entrance and guide roller: Diameter is ¢ 65mm, material is SAE1045, HRC48-52° Surface with chrome
Flattener
The quantity of leveler rolls must be planned according to thickness 2.0mm to 5.0mm.
Flattener roller: Upper is 3 rollers, down is 4 stations(total is 7 rollers)
Flattener roller material: SAE 1045 thermal treatment hardness 48-52 HRC.
Diameter of flattener shaft: ¢ 95mm, material is ASTM52100, hardening and tempering
Pre-cutting
Cutting type: Hydraulic, connect with the punching hydraulic unit
Cutting power by hydraulic, 7.5KW AC motor
Hydraulic working pressure: 16-20Mpa
Cutting before forming: Cut the sheet before roll forming to required length
Feeding of the last cut profile from the equipment: Automatic if the length of the last profile is not less than 2000 mm
Profile transversal cutting device units allowing to cut the bent profile without damaging the metal coating and to assure a smooth cut
Cutting motion: The roll forming part is NON-stop when cutting
Material of blade: Cr12 with heat treatment
Length measuring: Automatic encoder length measuring, brand: Omron
Tolerance of length: +/- 1.5mm each piece end product
Forming Section
Material of the profile: Hot rolling material, 195-235Mpa GI or metal
Thickness range: 2.0-5.0mm
Maximum production speed: Not less than 10 meters per minute (for non-perforated profiles, excluding cutting)
Main motor power: 22kw, AC motor, motor inside of main machine
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station: 9 stations
Roller material: ASTM52100 chrome plated surface with hardness 58-62 degree, CNC,
Shaft diameter: ¢ 100mm material: SAE1045 with quenching and tempering
Transmission: By gear box for each station
Roll former has leveling bolts in the base for adjust the leveling
Machine base frame adopt H beam welding steel
Adjust the size: Manual adjust machine when change profile, change the bottom width of the profile is in automatic
In the main Roll forming machine have 1 button for urgency stop if happen any malfunction.
Machine adopt iron cast as station to make machine in strong
To avoid accidents, all of drive part adopt protect cover
Hydraulic station
Hydraulic power: 7.5kw
Working pressure: 16-20Mpa adjustable
Solenoid valve: 1 group (1 for pre-cutting and 2 for punching)
Hydraulic oil: 46# hydraulic oil Contact us if you need more details on Gutter Roll Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Forming Machine、Roll Forming Machinery. If these products fail to match your need, please contact us and we would like to provide relevant information.
Hydraulic decoiler→ feeding→flatten→cutting→roll forming→output table
Feeding-flatten-pre-cutting-forming station
Feeding
Adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Feeding type: Adjustable
Feeding width range: 700-900mm: 700-900mm
Entrance and guide roller: Diameter is ¢ 65mm, material is SAE1045, HRC48-52° Surface with chrome
Flattener
The quantity of leveler rolls must be planned according to thickness 2.0mm to 5.0mm.
Flattener roller: Upper is 3 rollers, down is 4 stations(total is 7 rollers)
Flattener roller material: SAE 1045 thermal treatment hardness 48-52 HRC.
Diameter of flattener shaft: ¢ 95mm, material is ASTM52100, hardening and tempering
Pre-cutting
Cutting type: Hydraulic, connect with the punching hydraulic unit
Cutting power by hydraulic, 7.5KW AC motor
Hydraulic working pressure: 16-20Mpa
Cutting before forming: Cut the sheet before roll forming to required length
Feeding of the last cut profile from the equipment: Automatic if the length of the last profile is not less than 2000 mm
Profile transversal cutting device units allowing to cut the bent profile without damaging the metal coating and to assure a smooth cut
Cutting motion: The roll forming part is NON-stop when cutting
Material of blade: Cr12 with heat treatment
Length measuring: Automatic encoder length measuring, brand: Omron
Tolerance of length: +/- 1.5mm each piece end product
Forming Section
Material of the profile: Hot rolling material, 195-235Mpa GI or metal
Thickness range: 2.0-5.0mm
Maximum production speed: Not less than 10 meters per minute (for non-perforated profiles, excluding cutting)
Main motor power: 22kw, AC motor, motor inside of main machine
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station: 9 stations
Roller material: ASTM52100 chrome plated surface with hardness 58-62 degree, CNC,
Shaft diameter: ¢ 100mm material: SAE1045 with quenching and tempering
Transmission: By gear box for each station
Roll former has leveling bolts in the base for adjust the leveling
Machine base frame adopt H beam welding steel
Adjust the size: Manual adjust machine when change profile, change the bottom width of the profile is in automatic
In the main Roll forming machine have 1 button for urgency stop if happen any malfunction.
Machine adopt iron cast as station to make machine in strong
To avoid accidents, all of drive part adopt protect cover
Hydraulic station
Hydraulic power: 7.5kw
Working pressure: 16-20Mpa adjustable
Solenoid valve: 1 group (1 for pre-cutting and 2 for punching)
Hydraulic oil: 46# hydraulic oil Contact us if you need more details on Gutter Roll Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Forming Machine、Roll Forming Machinery. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Gutter roll forming machine
Premium Related Products
Other Products
Hot Products
High quality heat insulation roof tile machineNew type high quality aluminium coil slitting machine priceHigh quality MR1000 galvanized sheet corrugated machineEuropean standard High quality steel structure truss purlinEuropean standard most popular aluminum foil/steel coil embossing machineLow Operational Cost Expressway Guardrail Forming MachinePrime quality ppgi roofing sheet/galvanized steel coil /ppgiHigh quality storage rack roll forming machine make AG profileHigh quality double roll forming machine for sale2014 Low Energy Consumption Ridge Cap Roll Forming Machine For TheatreHigh quality aluminum foil coating line,sheet coating lineHigh Quality Quick Interchangeable Purlin Roll Forming MachineHigh Quality Dual roof panel roll forming machineEuropean standard high quality IBR forming machine for roofingVarious customized Roll forming machine priceEuropean standard Top quality slotted glavanized 45 degree angle iron making machine