Glaze Steel Tile Forming Machine
Payment Type: | L/C,T/T,D/P,Paypal,Money Gram,Western Union |
---|---|
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Set/Sets |
Delivery Time: | 30 Days |
Packaging: | plastic packing and nude in the container or according to your requirement |
---|---|
Productivity: | 600sets/year |
Brand: | ZHOUMING |
Transportation: | Ocean,Land,Air |
Place of Origin: | China |
Supply Ability: | 50sets/month |
Certificate: | CE/ISO |
Port: | Tianjin Xingang |
Basic Info
Model No.: 828
Product Description
Glaze Steel Tile Forming Machine
About mataining the glaze steel tile Forming Machine: Add mechanical lubricating oil to the chains, bearings and sliding track of cutting device every month. Add mechanical lubricating oil to the reduction box every half a year. We are specialized in designing and manufacturing glaze steel tile forming machine and some other special profile Roll forming machine. Our engineer has over 10 years' experience in this field. By the way, we can also supply the PPGI coil, Galvanized Steel coil and aluminum coil.
Specifications:
Thickness of material: 0.3-0.8mm
Main structure: 300H steel
Feeding with: 1000mm
Effective width: 828mm
Wall plate: 14mm
Diameter of shaft: Ф70 solid
Electric motor power: 3KW
Reducer: 45# cycloid reducer
Roller: 11-18rows
Forming speed: 8-12m/min
Material of Rollers: Carbon Structural Steel Hard chromium Plating on the surface
Cutting type: Hydraulic shearing
Motor: 380V, 50HZ/3 phase
Electrical part:CHINT,Delixi
Hydraulic motor: 3KW
Tail cutting material: Delta PLC-14ES
Delivery: 30 days after receipt of advance payment
Package: Plastic packing and nude in the container
Payment Term: T/T, L/C, Trade assurance
Warranty: 12 months limited warranty
The pro
Images:
Related Machines
Produce process flow
Components
1. Cutting Mechanism
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products. Match equipment : one set of cutting tool, one hydraulic tank ,one cutter machine. Stop to cut , Post cut
3. Hydraulic systerm
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
It adopts Taida PLC to control(can make as your requirement). The target piece length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one.
5. Manual un-coiler
6. Recieving table
Main framework adopts welded steel and supported roller, and used for transmit and collect the finished products.
Packing&shippment
Contact
Any interest, please feel free to contact with us.
Product Categories : Roll Forming Machine > Single Layer Roof Roll Forming Machine